BROSSE IPQC-MAKEUP

How we take a beauty tool from raw material to a shelf-ready product, station by station.

Adhérence de revêtement: L'essai d'éclosion doit être de classe ≥ 4B.
Clarté du logo: La sérigraphie ou l'estampage à chaud doit avoir zéro ligne brisée ou décalage.
Équilibre de poids: Tête de brosse pour manipuler le rapport de poids est approximativement $3:7$ .

Brosse en gros de maquillage de BSFL

BROSSE FQC-MAKEUP

Shedding Rate: ≤3 hairs lost after simulated use 10 times. Tuft Fastness: Single hair pull-out force≥ 0.15 N. Resilience: ≥90 recovery within 5 seconds after 90° bending. Chemical Resistance…

BROSSE FQC-MAKEUP

Load Bearing Test: 500g static load for 10 minutes with zero deformation or detachment. Drop Test: 1-meter height drop onto a concrete floor 3 times with no cracking. Salt Spray Test (Metal)…

BROSSE FQC-MAKEUP

Bending Strength: Withstands 5 N*m torque with zero breakage. Drop Test: 1-meter height drop 3 times with no cracking. Heavy Metal Migration (Children Line): Pb < 90 ppm, Cd< 75 ppm.

BROSSE IPQC-MAKEUP

Tufting Density: Matches design value ±5\% (e.g., 1500 hairs/cm²). Hair Alignment: Tip flatness ≤0.3 mm. Glue Penetration: Zero glue overflow to the functional hair area.

BROSSE IPQC-MAKEUP

Tufting Glue Gap: Upper inner diameter minus hair root = 0.3 – 0.8 mm. Handle Interference: Lower inner diameter = handle diameter* 0.92±0.1 mm. Perpendicularity: Angle between hair ce…

BROSSE IQC-MAKEUP

Material Authenticity: Matches nominal specifications (animal hair or synthetic fiber). Single Hair Diameter: Follows standard brush parameters. Moisture Content (Animal Hair): 8% – 12…

BROSSE IQC-MAKEUP

Material: Matches Al, Cu, or PP specifications. Diameter: Follows standards within 0.05 mm. Wall Thickness: ≥ 90% of nominal value. Surface: Anodized film ≥10μm.

BROSSE IQC-MAKEUP

Wood Moisture Content: 8% – 12% to prevent warping. FSC Certification: Valid certificate and traceable batch records. Diameter & Length: Matches design value within ±0.2 mm. Surfac…

Coordonnées

Bâtiment 4, n° 29, ruelle 321, rue Tongning, district de Jiangbei, Ningbo, Zhejiang 315020, Chine

+86 159 6804 2509

+1 213 272 2247

+86 574 56130169

bsfl@airmeitec.com

Autres ateliers

Parc industriel de Lujun, à 150 mètres à l'ouest du carrefour entre l'avenue Songhe et l'avenue Zhiyuan, comté de Luyi, province du Henan

Village de Huangjianshan, rue Lizhou, ville de Yuyao – Usine de Ningbo Yicai Makeup Co., Ltd (en cours de construction) Bureau 1-24, bâtiment 008, n° 7, rue Hongxing, district de Jiangbei, ville de Ningbo, province du Zhejiang

BROSSE IPQC-MAKEUP

Brosse en gros de maquillage de BSFL

BROSSE FQC-MAKEUP

BROSSE FQC-MAKEUP

BROSSE FQC-MAKEUP

BROSSE IPQC-MAKEUP

BROSSE IPQC-MAKEUP

BROSSE IQC-MAKEUP

BROSSE IQC-MAKEUP

BROSSE IQC-MAKEUP

Liens rapides

Coordonnées

Autres ateliers